-
Fully-Automatic Waste Water Treatment Plant Sludge Dewatering Screw Filter Press Mobile Sludge Dewatering System
Mobile portable wastewater treatment plant is a movable vehicle type sludge dewatering complete system which is easy to move.It can be of service for different sewage treatment sites in different places.The unit is mainly composed of screw type dehydrator, integrated polymer preparation unit, polymer feed pump, sludge pump and sludge conveyor. -
Micro Rotary Drum Filter for Wastewater Filtration
Micro filtration machine, also known as rotary drum grille, is a purification device that uses 80-200 mesh/square inch microporous screen fixed on the rotary drum filtration equipment to intercept solid particles in wastewater and achieve solid-liquid separation.
-
Cheap PriceList for Screw Stacked Type Biogas Manure Slurry Sludge Dewatering Machine Solid Liquid Separator
ZDL Sludge dewatering machine set automatic control cabinet ,flocculation conditioning tank ,sludge thickening and dewatering body and a collecting tank and integration ,can be in automatic operation conditions, to achiece efficient flocculation ,and continuously complete sludge thickening and dewatering work ,will eventually collected filtrate recirculation or discharge.
-
ZDL Stacked Spiral Sludge Dewatering Machine
1. Stacked screw sludge dehydrator, applicable concentration 2000mg / l-5000mg / L It can not only treat high concentration sludge, but also concentrate and dehydrate low concentration sludge directly. It is applicable to a wide range of sludge concentration, up to 2000mg / l-5000mg / L.
2. The movable fixed ring replaces the filter cloth, which is self-cleaning, non clogging and easy to treat oily sludge
Under the rotation of the screw shaft, the movable plate moves well relative to the fixed plate, so as to realize the continuous self-cleaning process and avoid the common blockage problem of the traditional dehydrator. Therefore, it has strong oil resistance, easy separation and no blockage. -
ZWN Type Rotary Filter Dirt Machine (micro Filtration)
Working Principle The machine is suitable for the solid-liquid separation of industrial wastewate... -
Ceramic vacuum filter
The CF series ceramic filter series products developed by the company are new products integrating Electromechanical, microporous filter plate, automatic control, ultrasonic cleaning and other high and new technologies. As a new alternative to filtration equipment, its birth is a revolution in the field of solid-liquid separation. As we all know, the traditional vacuum filter has large energy consumption, high operation cost, high moisture content of filter cake, low work efficiency, low degree of automation, high failure rate, heavy maintenance workload and large consumption of filter cloth. The CF series ceramic filter has changed the traditional filtration mode, with unique design, compact structure, advanced indicators, excellent performance, remarkable economic and social benefits, and can be widely applied in non-ferrous metals, metallurgy, chemical industry, medicine, food, environmental protection, thermal power plants, coal treatment, sewage treatment and other industries.
-
ZGX Series Grille Decontamination Machine
ZGX series grid trash remover is a special rake tooth made of ABS engineering plastic, nylon 66, nylon 1010 or stainless steel. It is assembled on the rake tooth shaft in a certain order to form a closed rake tooth chain. Its lower part is installed in the inlet channel. Driven by the transmission system, the whole rake tooth chain (water facing working face) moves from bottom to top and carries solid debris to separate from the liquid, The liquid flows through the grid gap of the rake teeth, and the whole working process is continuous.
-
ZB(X) Board Frame Type Sludge Filter Press
The reducer is driven by the motor, and the pressing plate is pushed by the transmission parts to press the filter plate. The compression screw and fixed nut are designed with reliable self-locking screw angle, which can ensure the reliability and stability during compression. Automatic control is realized by motor comprehensive protector. It can protect the motor from overheating and overload.
-
ZSC Series Rotary Bell Type Sand Removing Machine
Rotary bell desander is a newly introduced technology, which is used to remove most sand particles with a diameter of more than 02.mm in water supply and drainage engineering, and the removal rate is more than 98%.
The sewage enters tangentially from the grit chamber and has a certain flow rate, which generates centrifugal force on the sand particles, so that the heavier sand particles settle to the sand collecting tank at the bottom of the tank along the unique structure of the tank wall and grit chamber, and prevent the sinking of small sand particles. The advanced air lifting system provides good conditions for the discharge of grit. The grit is directly transported to the sand water separator equipment to realize the complete separation of grit and sewage.
-
ZDU Series Of Running Belt Vacuum Filter
Zdu series continuous belt vacuum filter is a device for solid-liquid separation driven by vacuum negative pressure. Structurally, the filter section is arranged along the horizontal length direction, which can continuously complete filtration, washing, drying and filter cloth regeneration. The device has high filtration efficiency, large production capacity, good washing effect, low moisture content of filter cake and flexible operation, Low maintenance cost. It can be widely used in solid-liquid separation in metallurgy, mining, chemical industry, papermaking, food, pharmacy, environmental protection and other fields, especially in gypsum dehydration in flue gas desulfurization (FGD).
-
Spiral Sand Water Separator Mud Recycling Machine
The separation efficiency can be as high as 909 ~ 8%, and particles ≥ 0.m2m can be separated. It adopts shaftless screw and anhydrous middle bearing, which is convenient for maintenance.
Compact structure and light weight.
The key part of the new transmission device is the advanced shaft mounted reducer. Without coupling, it is easy to install and align. The lining strip is of quick installation type, which is easy to replace.
The axial position of the screw is adjustable, which is convenient to adjust the safety gap between its tail end and the box wall.
-
Shaftless screw conveyor , transportation equipment
Compared with the traditional shaftless screw conveyor, the shaftless screw conveyor adopts the design of central shaftless and hanging bearing, and uses the integral steel screw with certain flexibility to push materials
