-
Wsz-Ao Underground Integrated Sewage Treatment Equipment
1. Equipment can be fully buried, semi-buried or placed above the surface, not arranged in standard form and set according to the terrain.
2. The buried area of equipment basically does not cover the surface area, and can not be built on green buildings, parking plants and insulation facilities.
3. Micro-hole aeration uses the aeration pipeline produced by German Otter System Engineering Co., Ltd. to charge oxygen, not blocking, high oxygen charging efficiency, good aeration effect, energy saving and power saving.
-
ZDL stacked spiral sludge dewatering machine
ZDL Sludge dewatering machine set automatic control cabinet ,flocculation conditioning tank ,sludge thickening and dewatering body and a collecting tank and integration ,can be in automatic operation conditions, to achiece efficient flocculation ,and continuously complete sludge thickening and dewatering work ,will eventually collected filtrate recirculation or discharge.
-
Wsz-Mbr Underground Integrated Sewage Treatment Equipment
The device has assembly function: integrating oxygen deficiency tank, MBR bioreaction tank, sludge tank, cleaning tank and equipment operation room in a large box, compact structure, simple process, small land area (only 1 / -312 / of the traditional process), convenient incremental expansion, high automation, and anytime and anywhere, the device can be directly transported to the treatment target location, direct scale, without secondary construction.
Gathering sewage treatment and water treatment process in the same device, can be buried underground or surface; basically no sludge, no impact on the surrounding environment; good operation effect, high reliability, stable water quality and less operation cost. -
High Quality Mechanical Grille For Waste Water Treatment
Automatic stainless steel bar screen mechanical sieves for wastewater pre-treatment. The high efficient bar screen for wastewater treatment is installed at the inlet of pump station or water treatment system. It is composed of pedestal, specific plough shaped tines,rake plate, elevator chain and motor reducer units etc. It is assembled into different space according to different flow rate or channel width.
-
ZCF Series Cavitation Flotation Type Sewage Disposal Equipment
ZCF series air floating sewage treatment equipment is the latest product developed by our company with the introduction of foreign technology, and has obtained the use approval certificate of environmental protection products in Shandong Province. The removal rate of COD and BOD is more than 85%, and the removal rate of SS is more than 90%. The system has the advantages of low energy consumption, high efficiency, economic operation, simple operation, low investment cost and small floor area. It is widely used in the standard treatment of industrial sewage and urban sewage in papermaking, chemical industry, printing and dyeing, oil refining, starch, food and other industries.
-
ZGX Series Grille Decontamination Machine
ZGX series grid trash remover is a special rake tooth made of ABS engineering plastic, nylon 66, nylon 1010 or stainless steel. It is assembled on the rake tooth shaft in a certain order to form a closed rake tooth chain. Its lower part is installed in the inlet channel. Driven by the transmission system, the whole rake tooth chain (water facing working face) moves from bottom to top and carries solid debris to separate from the liquid, The liquid flows through the grid gap of the rake teeth, and the whole working process is continuous.
-
ZQF Series of Shallow Layer Air Floation Machine
The new-type high-efficiency shallow air flotation machine is made by our company through continuous test, use and improvement in recent ten years according to the latest foreign technology and the actual situation of China’s sewage treatment system. Compared with the traditional air flotation machine, the new-type high-efficiency shallow air flotation machine changes from static water inlet dynamic water outlet to dynamic water inlet static water outlet, Make the suspended solids (s) float vertically on the water surface in the relatively static environment of S. the sewage needs only 2-m3i in the purification tank, N and the treatment efficiency is very high. More than 20 domestic chemical pulp, semi chemical pulp, waste paper, papermaking, chemical industry, tanning, urban sewage and other units use our company’s air flotation machine, which has all met the discharge standard.
-
ZWN Type Rotary Filter Dirt Machine (micro Filtration)
Working Principle The machine is suitable for the solid-liquid separation of industrial wast... -
ZSC Series Rotary Bell Type Sand Removing Machine
Rotary bell desander is a newly introduced technology, which is used to remove most sand particles with a diameter of more than 02.mm in water supply and drainage engineering, and the removal rate is more than 98%.
The sewage enters tangentially from the grit chamber and has a certain flow rate, which generates centrifugal force on the sand particles, so that the heavier sand particles settle to the sand collecting tank at the bottom of the tank along the unique structure of the tank wall and grit chamber, and prevent the sinking of small sand particles. The advanced air lifting system provides good conditions for the discharge of grit. The grit is directly transported to the sand water separator equipment to realize the complete separation of grit and sewage.
-
ZPL Advection Type Air Floatation Precipitation Machine
In the sewage treatment process, solid-liquid separation is a crucial step. ZP gas l floating sedimentation integrated machine is one of the more advanced solid-liquid separation equipment at present. It comes from its integration of mixed air flotation and sedimentation. It is specially designed to drive away grease, colloidal substances and solid suspended substances in industrial and urban sewage. It can automatically separate these substances from wastewater. At the same time, it can also greatly reduce the content of BOD and COD in industrial sewage, so that the sewage treatment can reach the discharge standard, so as to reduce the sewage cost. Another important aspect is that by-products from wastewater treatment can often be recycled and reused. It really realizes the effect of one machine with multiple functions and simplifying the process.
-
ZSF Series of Dissolved Air Flotation Machine(vertical Flow)
ZSF series dissolved air floatation sewage treatment machine is of steel structure. Its working principle is: the air is pumped into the pressure dissolved air tank and forcibly dissolved in water under the pressure of 0.m5pa. In the case of sudden release, the air dissolved in the water is precipitated to form a large number of dense microbubbles. In the process of slow rise, the suspended solids are adsorbed to reduce the density of suspended solids and float upward, The purpose of removing SS and CODcr is achieved. The product is suitable for sewage treatment of petroleum, chemical industry, papermaking, leather, printing and dyeing, food, starch and so on.
-
Spiral Sand Water Separator Mud Recycling Machine
The separation efficiency can be as high as 909 ~ 8%, and particles ≥ 0.m2m can be separated. It adopts shaftless screw and anhydrous middle bearing, which is convenient for maintenance.
Compact structure and light weight.
The key part of the new transmission device is the advanced shaft mounted reducer. Without coupling, it is easy to install and align. The lining strip is of quick installation type, which is easy to replace.
The axial position of the screw is adjustable, which is convenient to adjust the safety gap between its tail end and the box wall.
